First Renders of Motorola P40 Leaked Showing Off Full Design With Punch Hole Display

Motorola P40: Rumoured Specifications and Features

In addition to the overall design and look of the phone, the key specifications of the Motorola P40 have also been leaked. Rumours suggest that the Motorola P40 will come packed with a 6.2-inch display and there will be no notch on the top of the screen. The renders show that the P40 will be an almost bezel-less phone, and will include pretty thin bezels on the sides. Notably, compared to all the sides the chin is slightly thicker considering it embeds the Motorola branding on it. The renders also show the phone from the sides which reveal that on the left side there will be the SIM tray, while on the right there are the Volume and Power buttons. Motorola isn’t ditching the 3.5mm headphone jack as of yet and the jack will be placed on the top edge of the phone. The P40 will also come with USB Type-C port, a speaker grille, and mic hole on the bottom.

Coming to the back panel of the phone, the Motorola P40 will feature 3D curved edges so that the users can have a good hand grip of the phone. The renders show that the back panel of the P40 will be reflective and is said to be made of glass and not plastic or metal. The P40 will sport dual camera setup on the back panel which will be aligned in a vertical fashion. The leak suggests that the P40 will come packed with a 48MP primary camera paired with dual LED flash which will sit right below the rear camera setup. The megapixel of the secondary camera of the P40 is yet to be revealed. Following the dual camera setup of the Moto phone will be a fingerprint sensor embedded in the Motorola logo as also seen on the other recently launched Motorola phones.